Feed Entries

Repetier Firmware

Repetier Firmware

Repetier FirmwareThis is also one of the old hands and was the first firmware to feature an online tool for easy configuration of settings.

I recommend this firmware to all 3D printing enthusiasts who have little to no programming knowledge and want to use 8-bit (Arduino Mega 2650), 32-bit (Arduino Due) or compatible hardware with both processors. The big advantage of this firmware is the online configuration, which allows you to easily and clearly enter the values with explanations in the form and then simply download and install them via the Arduino IDE. For updates, you can simply upload Configuration.h, adjust the desired settings, and download the modified file. It couldn't be easier.

The firmware works very well in combination with an Arduino Mega 2650 with Ramps 1.4 and the Smart Full Graphic Smart Display in combination with the Repetier-Host, you can easily make changes to the firmware on the display (please note that the changes should still be saved manually in Configuration.h, as you can only read/change the settings via the display).

If you control the printer via the Repetier Host, all print information can be transferred to the display, and the settings (pause, cancel, speed, flow) can be adjusted both via the PC and via the display.

{Important note! The Repetier firmware has not been further developed for several years now, so I can no longer recommend this firmware. Nevertheless, I will post my notes on optimization online in case anyone still wants to try this simple but very powerful firmware.}

Manufacturer's download link

No items found
Please click here to return to the previous page

Werbung

3D Jake

×** [Flexisystem PLG: Adding css classes to BODY: 0.001 s]
0.000 seconds (0.000); 21.75 MB (21.746) - START: FLEXIcontent component
0.497 seconds (0.497); 32.64 MB (10.895) - END: FLEXIcontent component: (VIEW: category)

-- [Initialize component: 0.02 s]
-- [Query: item LISTING: 0.04 s]
-- [FC Templates: XML files parsing: 0.00 s]
-- [FC Templates: LESS files parsing: 0.00 s]
-- [FC Templates: INI files parsing: 0.00 s]
-- [FC "category" view Template Rendering: 0.02 s]
-- [FC Filters Creation: 0.16 s]
  Filters Init: 0.00 s
0.003 sanzahl-der-hotendsFACETED: current filters: (0 active)
0.002 sbauteilkuehlungFACETED: current filters: (0 active)
0.002 sbeschichtungFACETED: current filters: (0 active)
0.002 sbetriebssystem-2FACETED: current filters: (0 active)
0.002 sconnectivitaetFACETED: current filters: (0 active)
0.002 sempfohlene-einsatzbereichFACETED: current filters: (0 active)
0.002 sfilament-dFACETED: current filters: (0 active)
0.001 sfirmwareFACETED: current filters: (0 active)
0.002 sgesamte-zeitFACETED: current filters: (0 active)
0.002 skaufempfehlungFACETED: current filters: (0 active)
0.002 skilopreisFACETED: current filters: (0 active)
0.002 smenge-2FACETED: current filters: (0 active)
0.001 sslicerFACETED: current filters: (0 active)
0.002 sspulenFACETED: current filters: (0 active)
0.002 sspulenbFACETED: current filters: (0 active)
0.002 sspulenidFACETED: current filters: (0 active)
0.005 sx-achseFACETED: current filters: (0 active)
0.006 sY-achseFACETED: current filters: (0 active)
0.007 sZ-achseFACETED: current filters: (0 active)
0.007 saenderungen-am-druckerFACETED: current filters: (0 active)
0.006 sloesung-einschrenkenFACETED: current filters: (0 active)
0.001 sproblem-definitionFACETED: current filters: (0 active)
0.003 sutensilienFACETED: current filters: (0 active)
0.003 szubereitungFACETED: current filters: (0 active)
0.002 svorbereitungFACETED: current filters: (0 active)
0.001 sheizbetttemperaturnon-FACETED
0.001 sduesentemperaturnon-FACETED
0.007 smin-schichthoehenon-FACETED
0.002 styp-2FACETED: current filters: (0 active)
0.003 stype1FACETED: current filters: (0 active)
0.001 sprojekt-umsetzungFACETED: current filters: (0 active)
0.001 sstuetzmaterialFACETED: current filters: (0 active)
0.003 sherstellerFACETED: current filters: (0 active)
0.001 sprojektlaufzeitnon-FACETED
0.003 sprojekttypeFACETED: current filters: (0 active)
0.001 sanmerkung_rezeptFACETED: current filters: (0 active)
0.004 szutatFACETED: current filters: (0 active)
0.003 szutat-neuFACETED: current filters: (0 active)
0.002 sschwierigkeitFACETED: current filters: (0 active)
0.003 sfarbeFACETED: current filters: (0 active)
0.002 shardwareempfehlungFACETED: current filters: (0 active)
0.002 sZertifizierungenFACETED: current filters: (0 active)
0.003 szugfestigkeit-bis-bruchnon-FACETED
0.003 smaterialFACETED: current filters: (0 active)
0.002 shardwareFACETED: current filters: (0 active)
0.002 sbetriebssystemFACETED: current filters: (0 active)
0.003 sproblemFACETED: current filters: (0 active)
0.002 sdichteFACETED: current filters: (0 active)
0.002 sglass-transFACETED: current filters: (0 active)
0.002 sschrumpfungFACETED: current filters: (0 active)
0.004 svicatFACETED: current filters: (0 active)
0.003 swaermeformbestaendigkeitFACETED: current filters: (0 active)
0.002 swaermeformbestaendigkeit-2FACETED: current filters: (0 active)
0.002 sstreckgrenzeFACETED: current filters: (0 active)
0.002 selastizitaetsmodulFACETED: current filters: (0 active)
0.003 sfunktionFACETED: current filters: (0 active)
0.002 sglaettbar-mitFACETED: current filters: (0 active)
0.002 screatedFACETED: current filters: (0 active)
0.003 smodifiedFACETED: current filters: (0 active)
0.004 stagsFACETED: current filters: (0 active)
0.003 sbruchdehnungFACETED: current filters: (0 active)


0.000 seconds (0.000); 41.04 MB (41.043) - START: FLEXIcontent Search Module
0.007 seconds (0.007); 41.54 MB (0.494) - END: FLEXIcontent Search Module