Feed Entries

3D Printing

3D Printing Guid (6) Facts & Tips (16) .Stl Collection (1) Since there are more and more 3D file sites and most of them don't have a very good search function, I have compiled ... FDM Design Guide (7) SLA Design Guide (0) FDM Slicer (1) FDM Firmware (108) Um den 3D Drucker zu steuern wird ein Kontrollboard/Mainboard mit passender Firmware benötigt. Die Firmware ist ... FDM 3D Printing Filament Guid (10) Mit diesem Filamentfilter ist die Suche nach dem perfekten Filament für das nächste Projekt eine kurze Angelegenheit. 3D Printer (6) For quite some time now, the market has been flooded with cheap printers and well-known manufacturers sell their ... Components (3)
G12

G12

G12 führt eine automatische Düsenreinigung aus.

created on
  Sunday, 28 December 2025
by
  Stefan Trucker  
G-Code
G11

G11

G11 is the counterpart to G10. This is the unretract, i.e. material is pushed back into the nozzle but not extruded, so the material does not leave the nozzle.

created on
  Sunday, 28 December 2025
by
  Stefan Trucker  
Funktion G-Code
G5

G5

G5 performs a quadratic Bézier curve movement. This means the printer follows a smooth, mathematically defined curve determined by: the start point (current position) a control point the end point This allows extremely smooth curves without many small G1 segments. Parameters: Parameter Meaning X ...

created on
  Saturday, 20 December 2025
by
  Stefan Trucker  
Bewegung G-Code
G3

G3

G3 performs a counter‑clockwise circular or arc movement. It is identical to G2 except for the direction of rotation.

created on
  Saturday, 20 December 2025
by
  Stefan Trucker  
G2

G2

G2 performs a clockwise circular or arc movement. It is used to print arcs or circles more smoothly than approximating them with many G1 segments.

created on
  Saturday, 20 December 2025
by
  Stefan Trucker  
G-Code Bewegung
Excavator for children

Excavator for children

Jedes Kind, das ich kenne findet in jungen Jahren Bagger und Baumaschinen toll und daher habe ich eine Sammlung an tollen Projekten / Geschenke gemacht.

created on
  Tuesday, 16 December 2025
by
  Stefan Trucker  
Klipper Global permanent variables

Klipper "Global" permanent variables

Klipper does not have an EEPROM like Marlin, but variables can still be permanently written so that they persist even after a reboot. This is done by creating a file in which the variables are written. This makes it very easy to view the variable's status and change it directly in the file.

created on
  Monday, 08 December 2025
by
  Stefan Trucker  

Werbung

3D Jake