Menü Configuration

Das Menü lässt sich einfach neu gestalten, wobei der einzige Nachteil liegt darin, dass man entweder nur Buttons hinten hinzufügen kann, oder man muss das gesamte Menü neu gestalten. Natürlich habe ich es mir zur Aufgabe gemacht, das ganze Menü neu zu konfigurieren und so könnt ihr dieses als Vorlage hernehmen und nach euren Wünschen anpassen.

KlipperScreen.conf

{Code}3,

[printer SJT S1 OF]

z_babystep_values: 0.05, 0.1

 Bed Screws
# define the screw positons required for odd number of screws in a comma separated list (CSV)
# possible values are: bl, br, bm, fl, fr, fm, lm, rm, center
# they correspond to back-left, back-right, back-middle, front-left, front-right, front-middle, left-middle, right-middle
# example:
screw_positions: bl, fl, rm

[main]
use_default_menu: false

[menu __main homing]
name: Home
icon: home
method: printer.gcode.script
params: {"script":"G28"}

[menu __main disable]
name: Disable Motor
icon: motor-off
method: printer.gcode.script
params: {"script":"M84"}

[menu __main temperature]
name: Temperature
icon: heat-up
panel: temperature

[menu __main extrude]
name: Extrude
icon: extrude
panel: extrude

[menu __main calibrate]
name: Calibrate
icon: settings

[menu __main calibrate inputshaper]
name: Input Shaper
icon:  move
#method: printer.gcode.script
#params: {"script":"TEST_RESONANCES AXIS=X"}
panel: input_shaper

[menu __main calibrate bed_leveling]
name: Bed Level
icon: bed-level
panel: bed_level

[menu __main calibrate bed_mesh]
name: Bed Mesh
icon: bed-mesh
panel: bed_mesh

[menu __main calibrate z_calibrate]
name: Z Calibrate
icon: z-tilt
panel: zcalibrate

[menu __main settings]
name: Settings
icon: settings

[menu __main settings limits]
name: Limits
icon: fine-tune
panel: limits

[menu __main settings retraction]
name: Retraction
icon: retraction
panel: retraction

[menu __main settings spoolman]
name: Filament
icon: spool
panel: spoolman

[menu __main settings console]
name: Console
icon: console
panel: console

[menu __main settings system]
name: System
icon: info
panel: system

[menu __main settings save_config]
name: Save Config
icon: sd
method: printer.gcode.script
params: {"script":"save_config"}

[menu __main settings klipper_screen]
name: Klipper Screen
icon: klipper
panel: example

[menu __main settings network]
name: Network
icon: network
panel: network

[menu __main settings notifications]
name: Notifications
icon: notifications
panel: notifications

[menu __main settings Macros]
name: Macros
icon: custom-script
panel: macros

[menu __main settings LED]
name: LED
icon: light
panel: led

[menu __main settings FAN]
name: FAN
icon: fan
panel: fan

[menu __main settings move]
name: Move
icon: move
panel: move

#[menu __main Leveloption]
#name: Bed Leveling Options
#icon: print
#method: printer.gcode.script
#params: {"script":"SHOW_PROMPT"}

[menu __main print]
name: Print
icon: print
panel: print

#Materials
[preheat PLA]
extruder: 220
#extruder1: 60
heater_bed: 40
# Use the name
#chamber: 60
# or the full name
#heater_generic chamber: 60
# or for example apply the same temp to devices of the same type
#temperature_fan: 40
#heater_generic: 60
# optional GCode to run when the option is selected
gcode: #MY_HEATSOAK_MACRO

[preheat PETg]
extruder: 240
#extruder1: 60
heater_bed: 60
# Use the name
#chamber: 60
# or the full name
#heater_generic chamber: 60
# or for example apply the same temp to devices of the same type
#temperature_fan: 40
#heater_generic: 60
# optional GCode to run when the option is selected
gcode: #MY_HEATSOAK_MACRO

#~# --- Do not edit below this line. This section is auto generated --- #~#
#~#
#~# [main]
#~# theme = material-dark
#~# print_estimate_method = slicer
#~# screen_blanking = 60
#~# autoclose_popups = False
#~# show_scroll_steppers = True
#~# auto_open_extrude = False
#~# print_sort_dir = date_desc
#~# print_view = list
#~# 
#~# [graph SJT S1 OF]
#~# extruder = False
#~#{/Code}